Save 39%
Xytronic LF853DTP Rework Station

Xytronic LF853DTP (5 IN 1) Lead-Free Multi Function Rework Station

List price: $699.00
$425.95
You save: $273.05 (39%)
Price in points: 426 points
LF-853DTP
+

Xytronic LF-853DTP 5 in One Multi-Function S.M.D. Rework Station. This Xytronic LF-853DTP Rework Station is the best tool for repairing work, combination with Xytronic LF-852D and LF-8800 which is specially designed for lead free soldering / desoldering, surface mount devices with temperature controlled hot air.

Xytronic LF853DTP Rework Station Product Features

1. Xytronic LF853DTP 5 IN ONE Rework Station: By design, saving working space, owning three function, can greatly meet the users need. Soldering, Desoldering, and Hot Air Rework Station.

2. LF853DTP SPECIAL INTELLIGENT CHIP MICROCOMPUTER CONTROL: Designed, double LED display operating by pressing keys, make it convenient and comfortable operation.
3. LF853DTP TEMPERATURE SELECTION: Fahrenheit and Centigrade (Celsius) temperature.
4. LF853DTP HEATER/SENSOR FAILED DETECTION: If sensor circuit fails, the display reads "S--E" and cut off the heater power. If heater circuit fails, the display will read "H--E" and cut off the heater power. 5. TEMPERATURE "LOCK-OUT" FEATURE: The temperature can be locked by "password" code that is convenient for production line management.
6. LF853DTP ESD SAFE AND SPIKE FREE CIRCUITRY: The "Zero Voltage" electronic switching design also protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.
7. LF853DTP DELAYED SUCTION: To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released.
8. LF853DTP LIGHTWEIGHT SOLDERING IRON: Ergonomic mini handle that stays cool and prevents operator fatigue.
9. LF853DTP
ENERGY SAVER MODE: If the station has been idle for 20 minutes, the energy saver feature will automatically engage, the temperature goes down to 150°C from the set temperature. Activating the solder/desolder wands will disengage the power saving feature and the unit will immediately ramp up to the preset temperature. When over 40 minutes without operation the main power will be switched off to "sleep mode" which cuts power consumption and extends tip life.
Please note:
You have to switch off the Xytronic LF-853DTP Rework Station first and then switch "ON" again to commence work when the unit goes to "Sleep" mode.
10. LF853DTP IRON WORKING OPTION: Both soldering, desoldering irons of the Xytronic LF853DTP Rework Station can be used at the same time. You can also set by pressing keys " SET + ▲" when you only use soldering or desoldering iron. At this time, the LF853DTP iron which you set will enter the power off suspend status. It means that the heater power is cut off. If press "▼"then the heater power will be on.
11. LF853DTP SMD TWEEZERS : The additional feature is specially designed for SMD chips, SOT, Flat pack ICs' etc. reworking. TWZ90 Tweezers can be interchangeable with soldering iron as an option. Be sure before proceeding this operation, the main switch must be "OFF" to avoid any damage to the unit.

Xytronic LF-853DTP Rework Station Accessories

Xytronic 307K
Xytronic DIA100 Desoldering Iron
Xytronic HAP 80 Hot Air Wand
Xytronic TWZ100 Hot Tweezers
Replacement Heating Element for Hot Air Wand 79-460012

Purchase the Xytronic LF853DTP Rework Station Today!

Vendors :
Xytronic
44-510623
$8.80 $7.50

44Xytronic 44-510623 (0.4mm 1/64") Conical Soldering Tip

Price in points: 8 points

44-510611
$8.80 $7.50

Xytronic 44-510611 (3mm) Angled Soldering Tip

Price in points: 8 points

44-510630
$17.59 $15.00

Xytronic 44-510630 Flat Pack Soldering Tip for 136, 136ESD, 137ESD, 456DLX, 988, LF-1600 and 107ESD

Price in points: 15 points

44-510633
$8.80 $7.50

Xytronic 44-510633 (1/16") Hoof Soldering Tip

Price in points: 8 points

44-510637
$16.06 $13.75

44-510637 Xytronic New Mini-Wave Soldering Tip for Drag Soldering IC's

Price in points: 14 points

44-510610
$8.80 $7.50

Xytronic 44-510610 (4.8mm 3/16") Chisel Soldering Tip

Price in points: 8 points

44-510607
$18.55 $15.75

Xytronic 44-510607 New Mini-Wave Tip for SMD Soldering

Price in points: 16 points

44-510603
$8.80 $7.50

Xytronic 44-510603 (.4mm 1/64") Extended Length Conical Soldering Tip.

Price in points: 8 points

44-510602
$8.80 $7.50

Xytronic 44-510602 (.8mm 1/32") Chisel Soldering Tip

Price in points: 8 points

44-510604
$8.80 $7.50

Xytronic 44-510604 (1.6mm 1/16") Chisel Soldering Tip

Price in points: 8 points

44-510605
$8.80 $7.50

Xytronic 44-510605 (3.2mm 1/8") Chisel Soldering Tip

Price in points: 8 points

44-510606
$8.80 $7.50

Xytronic 44-510606 Soldering Tip for 136, 136ESD, 137ESD, 456DLX, 988, LF-1600 and 107ESD, 137ESD, 456DLX and 988

Price in points: 8 points

44-510601
$8.80 $7.50

Xytronic 44-510601 (.8mm 1/32") Standard Conical Soldering Tip

Price in points: 8 points
TIPSETDESOLDER
$29.84 $25.40
Xytronic TIPSETDESOLDER Desoldering Tip Set (3 Tips) 1.0, 1.2, and 1.5mm Features: Compatible with XYtronic model numbers: 960D 968 988 988D...
+
Price in points: 26 points

44-915415
$11.09 $9.50
44-915415 Xytronic 1.5mm desoldering tip Features: Compatible with XYtronic model numbers: 960D 968 988 988D 999SD-A DIA60A DIA100 LF-8800...
+
Price in points: 10 points

44-915412
$11.09 $9.50

Xytronic 44-915412 Desoldering Tip for Xytronics Desoldering Stations (1.2)

+
Price in points: 10 points

44-915410
$11.09 $9.50

Xytronic 44-915410 Desoldering Tip for Xytronics Desoldering Stations (1.0)

+
Price in points: 10 points

Customers Also Purchased